Business energy for pubs: compare prices and cut your bills 

Time Icon

Read time: 5 minutes

Time Icon

By Les Roberts, Business Energy Expert

16th November, 2026

It takes a lot of energy to run a pub. Cellar cooling runs all day and night. Kitchens, extraction and long trading hours add more on top. 

Pub energy prices have climbed fast over the last decade, rising by an eye-watering 57%, according to the Dojo Inflation Index. That puts energy among the fastest-rising costs for many pubs. 

If you’re looking for the latest energy rates or ways to cut costs at your pub, read on. 

Business energy has no price cap. Your supplier sets a price for each site, so shopping around matters more for a pub than for a household. MoneySuperMarket compares quotes from trusted UK suppliers, so you can see your options in one place. 

In this guide to pub energy prices… 

  • You will see average pub energy costs, including costs for those that serve food and offer accommodation. 
  • Get a breakdown of current unit rates and standing charges, with a worked annual cost example. 
  • Learn what drives pub energy bills, from cellar cooling to late licences. 
  • Find out which contract suits your pub and what to do when you take on a new site. 
  • Get a list of practical ways to cut your pub's energy use and bills. 

What are current pub energy prices? 

Pub energy prices are the unit rates and standing charges a pub pays for business gas and electricity, agreed with a supplier for each site. 

The unit rate is measured in kilowatt-hours (kWh). This is the amount you pay for the power you use. A standing charge is a fixed daily fee you pay even when you're closed and maybe not using any energy. 

Below is a breakdown of November 2026 gas and electricity prices by annual usage levels.

Business electricity rates November 2026

Average annual usage (kWh)Average price (per kWhStanding charge (daily)Average annual price
5,000 - 15,00028.5p64.2p£3,084
(based on annual usage of 10,000 kWh) 
15,000 - 25,00028.0p76.5p£5,895
(based on annual usage of 20,000 kWh) 
25,000 - 50,00027.7p154.4p£11,625
(based on annual usage of 40,00 kWh) 

Business gas rates November 2026

Average annual usage (kWh)Average price (per kWh)Standing charge (daily)Average annual price
5,000 - 15,00079.4p42.6p£1,099
(based on annual usage of 10,000 kWh) 
15,000 - 30,0009.1p48.3p£2,214
(based on annual usage of 22,500 kWh) 
30,000 - 65,0009.2p55.4p£4,569
(based on annual usage of 47,500 kWh) 

Note: Prices are correct as of November 2026. Rates and bill size may vary according to your meter type and business location. The prices you’re quoted may be different from the averages shown. The figures shown are the average unit rates and standing charges received by Bionic from our panel of suppliers (inclusive of maximum Bionic commission), per business size thresholds, from January 1 to November 9, 2026.

If your pub is VAT-registered, you can reclaim VAT on energy like any other business expense. These figures are examples, not quotes. Your price could differ depending on when and how you use energy, the location of your pub, and its energy efficiency. 

What are average pub energy costs? 

Average pub energy costs are the typical annual amounts a pub pays for business gas and electricity. This is based on its type, size, and trading hours. 

Pubs that almost exclusively serve drinks (known as a wet-led pub) could pay up to £9,000 a year on gas and electricity. If it also serves food, bills could rise to nearly £40,000 or more. A pub with rooms could pay £50,000 or more. 

Pub type Average electricity (kWh a year) Average gas (kWh a year) Typical annual cost (without standing charge, VAT & CCL)Typical monthly cost (without standing charge, VAT & CCL)
Wet-led pub 15,000 to 30,000 20,000 to 40,000 £6,000  to £13,000£500 to £1,100
Food-led pub 40,000 to 80,000 50,000 to 100,000 £15,000 to £31,000£1,250 to £2,6000
Pub with rooms 60,000 to 110,000 80,000 to 150,000 £23,000 to £49,000£2,000 to £4,100

How we worked this out: usage bands are estimates for UK pubs. Costs apply average fixed rates based upon annual usage. Prices are correct as of November 2026. Rates and bill size may vary according to your meter type and business location. The prices you’re quoted may be different from the averages shown. The figures shown are the average unit rates and standing charges received by Bionic from our panel of suppliers (inclusive of maximum Bionic commission), per business size and usage thresholds, from November 1 to November 9, 2026. They are examples, not quotes. 

A wet-led pub makes most of its income from drinks, not food. A food-led pub has a full commercial kitchen. A pub with rooms also lets bedrooms, which adds heating, hot water and laundry. 

Your own costs may sit outside these ranges. Check your recent bills to find out how much energy your pub uses each month. This will also show you how much you pay per kWh and in standing charges; the main costs to compare when running a business energy comparison. 

You could also run a business energy audit to see how much you use and work out ways to use less.  

What drives pub energy bills? 

Pubs use energy for all sorts of tasks, including cellar cooling, kitchen extraction and heating, lighting, and loads more. Even trading hours can make a difference. 

If you operate outside ‘normal’ business hours (as most, if not all pubs do), consider switching to a time of use tariff. This charges a cheaper off-peak rate and could help cut your energy bills. 

Working out how and when you use most energy can help you work out what's best when choosing a new contract. How do the following affect your energy usage?

Cellar cooling energy 

Cellar cooling is the refrigeration that keeps beer, cider and kegs at serving temperature. It's usually running for 24 hours a day. 

It never switches off, so it sets your overnight baseload. Cellar cooling could make up 15 to 25% of a pub's energy bill. Add bottle fridges, ice machines and Python coolers, and refrigeration is often the biggest electricity load. 

Kitchens 

A full food offer could double a pub's electricity use. Fryers, grills, combi ovens and food heaters use a lot of power. Many kitchens also use gas cookers. Food-led pubs use energy much like restaurants. 

Extraction and ventilation 

Kitchen extraction fans run whenever the kitchen is open, and often longer. Air handling and air conditioning in busy bars add to usage and push up bills. 

Heating older buildings 

If your pub sits in an old, draughty building with high ceilings, you probably use a lot of gas for heating, especially from October to March.  

Trading hours and late licences 

Pubs trade evenings, weekends and bank holidays. A late licence adds hours of lighting, music, heating and washing. Longer hours mean more energy is used, even during quiet periods. 

Which energy contract is best for a pub? 

Most pubs suit a fixed contract, because it locks your rates and makes budgeting easier. Late-trading pubs with big overnight loads may also gain from a time-of-use tariff. 

Contract type How it works Useful if your pub… 
Fixed Unit rate and standing charge locked for between one and five years Wants steady bills and protection from price volatility
Time-of-use Different unit rates at different times of day Can shift heavy use, like glass washing or cooling, to off-peak hours 
Flexible You buy energy in blocks linked to the wholesale market Runs large or multiple sites with half-hourly meters 
Out-of-contract The default rates when a deal ends with no new one No pub should stay here by choice 

Is a time-of-use tariff good for late trading? 

A time-of-use tariff charges different unit rates at different times of day. Off-peak rates are usually overnight. Peak rates often fall between 4 pm and 7 pm. 

This could work if your cellar cooling, glasswashers and hot water run mostly after hours. It may cost more if your busiest trade falls in the evening peak. Check your smart or half-hourly meter data before you choose. 

Why you should avoid out-of-contract rates 

When a fixed deal ends with no new one, your supplier moves you to out-of-contract rates. These could cost thousands more a year, as the example above shows. Start comparing up to six months before your end date and lock in rates early to avoid price volatility. 

Opening a new pub: what happens to the energy? 

When you take on a pub, the previous tenant's contract does not pass to you. You start on a deemed contract with the existing supplier from the day you move in. 

A deemed contract is the default rate suppliers charge when you use energy at new premises without agreeing a contract. Deemed rates are higher than those you get with a fixed contract. There are no exit fees, so you should switch to a fixed deal as soon as possible. 

Steps to take on day one 

  1. Take meter readings and photos with the date showing. 
  2. Find your MPAN (electricity) and MPRN (gas) numbers. These identify your supply points. 
  3. Tell the supplier your move-in date and send proof, such as your lease or tenancy agreement. 
  4. Check whether the supply is in your name or the pub company's name. 
  5. Compare quotes and agree a new contract to start as soon as the change of tenancy goes through. 

Do you have to pay the previous tenant's debts? 

No. Energy debts belong to the person who used the energy. Your dated opening readings show where their use ends and yours begins. If a supplier still chases you, raise a complaint. If that fails, you can go to the Energy Ombudsman. 

Can a tied or tenanted pub choose its own supplier? 

Usually, yes. Being tied to a brewery covers drinks, not energy. If the account is in your name, you can normally pick your own supplier. Check your tenancy agreement first, as some pub companies arrange energy for their estate. 

How can pub groups manage energy across several sites? 

If you run two or more pubs, a multi-site energy contract could save you time and money. Suppliers may offer better rates when they price your sites together. 

A multi-site deal could give you: 

  • One contract end date, so no site slips onto out-of-contract rates. 
  • One bill, or one account with a breakdown for each pub. 
  • Pricing based on the combined usage of all your sites. 
  • Half-hourly data to compare sites and spot waste. 

If your contracts end at different times, you can line them up at renewal. MoneySuperMarket compares quotes from trusted suppliers for single sites and small pub groups. 

8 ways to cut pub energy use 

Small changes could make a big difference to pub energy bills. In a 2026 government trial, 90 hospitality businesses cut bills by nearly £2,500 a year on average. One pub in Bromley cut its energy use by 26%. A pub in Caterham cut overnight use by 66%. 

1. Service your cellar cooling 

Clean condensers and check door seals at least once a year. Set cask cellar temperatures between 11°C and 13°C. A struggling unit runs nonstop and wastes power. 

2. Cut overnight usage 

Switch off glasswashers, bottle fridges, heating and cooling when you close, where stock allows. Your smart meter shows overnight use, so you can check it works. 

3. Switch to LED lighting 

Pubs run lights for long hours, seven days a week. LED bulbs use far less power than halogen or fluorescent lights. Do the bar, garden and signs. 

4. Fit timers on heating and hot water 

Set heating to come on shortly before opening, not hours before. Put patio heaters on timers or switch to infrared heaters. 

5. Insulate cellar pipes and Python lines 

Lagging stops pipes and beer lines from picking up heat. Your cooler then works less hard. 

6. Use your meter data 

A smart or half-hourly meter shows when your pub uses the most energy. Check it each month to spot waste. 

7. Replace old kit when it fails 

Pick energy-efficient fridges, ovens and glasswashers. Running costs often matter more than the price tag. 

8. Compare before you renew 

Put your contract end date in the diary. Start comparing up to six months ahead, so you never roll onto out-of-contract rates. 

Do pubs pay VAT and the Climate Change Levy on energy? 

Yes, most pubs pay 20% VAT and the Climate Change Levy on their gas and electricity. 

The Climate Change Levy (CCL) is a government tax added to business gas and electricity bills for each kWh used. From 1 April 2026, the main rate is 0.801p per kWh for both electricity and gas (GOV.UK). It is due to rise to 0.827p per kWh from 1 April 2027. 

VAT on business energy is 20% as standard. You pay 5% VAT and no CCL if your average use stays below: 

  • 33 kWh of electricity a day, or 
  • 145 kWh of gas a day. 

Few pubs fall under these limits, but a small pub may use a lot less gas, so it’s worth checking your usage. If your pub is VAT-registered, you can usually reclaim the VAT on your energy bills. Check with your accountant and find out more in our guide to VAT and business energy. 

Pub energy FAQs 

Here are answers to the questions licensees ask most about pub energy prices. 

How much does a pub spend on energy per year? 

A wet-led pub could spend around £6,000 to £300 a year on gas and electricity. A food-led pub could spend £15,000 to £31,000. A pub with rooms could spend more than £40,000. Your kitchen, cellar and opening hours make the biggest difference. 

How much does cellar cooling cost a pub? 

Cellar cooling runs 24 hours a day, so it adds up fast. It could make up 15 to 25% of a pub's energy bill. Regular servicing and the right temperature setting could cut that cost. 

Are pubs covered by the energy price cap? 

No. The Ofgem price cap only covers household energy. If you live above the pub on a separate domestic meter, that meter is covered by the cap. 

Can a tenanted pub choose its own energy supplier? 

Usually, yes, if the energy account is in your name. A beer tie rarely covers gas and electricity. Check your tenancy agreement before you switch. 

Do I have to pay the previous tenant's energy bills? 

No. Debts belong to the previous occupier. Send the supplier dated meter readings and proof of your move-in date. If they still chase you, complain and then contact the Energy Ombudsman. 

Is a time-of-use tariff good for a late-night pub? 

It could be, if you can move heavy use like glasswashing to off-peak hours. It may cost more if your busiest trade falls in the evening peak. Check your half-hourly data first. 

Is my pub a microbusiness for energy? 

Ofgem treats you as a microbusiness if you have fewer than 10 staff and turnover under €2 million. You also qualify if you use under 100,000 kWh of electricity or 293,000 kWh of gas a year. Microbusinesses get clearer contract terms and access to the Energy Ombudsman. 

When should I start comparing pub energy prices? 

Start up to six months before your contract ends. Many suppliers will quote that far ahead. This gives you time to compare and switch without landing on out-of-contract rates. 

Compare pub energy prices with MoneySuperMarket 

You have enough to run without chasing energy suppliers. When you get a quote with MoneySuperMarket, we compare deals from a panel of suppliers for your pub. You can pick the contract that fits your trading hours and budget.

Is it time to compare business energy quotes and switch?

Take the hassle out of sorting your next energy deal. We compare from a panel of suppliers. You choose the rates that are right for your business.

By clicking ‘COMPARE TODAY'S RATES’ you agree for us to search your current energy supplier and usage through industry held data. Enter manually

Our experts share essential knowledge on business energy

All related guides

View all energy guides

How to switch business energy suppliers with MoneySuperMarket

We can switch your business to a better energy deal in three simple steps

1

We find your details

Just enter your business address and we'll use industry data to accurately find and understand your energy usage.

2

We talk through your quotes

One of our UK-based energy experts will search our supplier panel and give you a call to talk through your quotes.

3

You choose the deal you want

With all the information to hand, you choose the deal that best suits your business and we’ll handle the switch for you.

Compare today’s business energy rates

By clicking ‘COMPARE TODAY'S RATES’ you agree for us to search your current energy supplier and usage through industry held data. Enter manually