home

Search

You searched for the word(s):
< 1 second(s)
  • Re: Economy 10/Heatwise

    [SSE HAVE JUST TAKEN OVER OWNERSHIP OF METER OPERTAVES FOR THEIR OWN CUSTOMERS IN NORWEB AREA SO I&#39;D RECOMMEND YOU GET THE E10 AS ALREADY ADVISED, TIMES ARE 00:00 - 05:00 13:00 - 16:00 &amp; 20:00 - 22:00 AM SURE. YUO SHOULD GET IT DONE VERY QUICKLY]Hi MPAN I am trying to find out about Economy 10 working with a new ground source heat pump ...
    Posted to Gas & electricity (Forum) by Mr MPAN on June 15, 2009
  • Re: Economy 10/Heatwise

    Hi, Generally some suppliers can support some Two MPAN tariffs but the heatwise is a killer due the amount of registers on it. I&#39;m sure EDF &amp;/or Npower can take on these as am sure I&#39;ve seen them supply before but give them a phone and advise you have two MPANs and the Tariff is called Heatwise and can they support and they will soon ...
    Posted to Gas & electricity (Forum) by Mr MPAN on April 15, 2009
  • Re: Economy 10/Heatwise

    Hi, Heatwise is only avaiable in the East and Midlands area (MPAN 11 &amp; 14) which can range from 4 to 5 registers and gives restricted 10hr off peak per day. Comfortplus (2 mtr 1 register each) is avaiable only in Scottish powers area (MPAN 18) and is a weather sensitive tariff giving you up to 14hrs off peak for storage heaters and thing on ...
    Posted to Gas & electricity (Forum) by Mr MPAN on April 12, 2009
  • Re: Economy 10/Heatwise

    Hi Dr dr, Got my mate to work out the prices at the momonet and on a single rate meter using 29018 is about &pound;3300 and to break even using E10 you would need to use at less 40% on the off peak to break even with the peak rate. Thats based on MPAN 12 prices as you said you where London. Also EDF lost their license to install E10 and all their ...
    Posted to Gas & electricity (Forum) by Mr MPAN on April 7, 2009
  • Re: Economy 10/Heatwise

    Hi, With E10 you can have a three phase E10 which would link all your single phases into one meter but depends on the area you are in as one or two Meter Opertaors dont fit 3Ph E10. With your emerrsion you will need to get a sparky to fit a timeswitch which will come on at E10 times as E10 provides a 24hr supply to your property and only switches ...
    Posted to Gas & electricity (Forum) by Mr MPAN on April 5, 2009
  • Re: Economy 10/Heatwise

    The industry dealing with E10 is diabolical no one jack about it. I work in the industry and will remain anonymous for professional reasons. E10 firstly is only for wet water radiator systems (works like a gas central heating but it electric) also underground heat pump etc this was its sole purpose it can&rsquo;t support storage heaters. If you ...
    Posted to Gas & electricity (Forum) by Mr MPAN on August 2, 2007