|
-
Dimplex Detroit Electric Inset Fire
Black and chrome effect finish, Unique Optiflame® effect, Freestanding, fits flat to wall, Heat Output: min 1kW, max 2kW, Heat Input: 2kW, Flat wall fit, We recommend that electrical fires are fitted by a qualified electrician, All fires must be installed in accordance with the manufacturers' installation instructions and current building regulations, To calculate running costs, multiply the heat input of the fire by your gas/electricity tariff (heat input x pence per kW/hr = running cost), Please note that our fires are designed to supplement central heating and should only be used as a secondary source of heat
|
|
£179.00
|
|
|
Optiflame Plus Effect with Real Coal, Effects work independent of heat, 2000W, 2 Heat settings, Stainless Steel with brass effect insert, Overheat protection, Pebbles etc included, H = 617mm, W = 514mm, D = 220mm
|
|
£274.02
|
|
|
-
SMEG L30FABREP Flueless Gas Fire, LPG, Red
Please note: For a limited period while stocks last. Not available through our shops or call centres. Please note:This fire is designed to work with LPG (liquefied petroleum gas) only. Designed in the UK, Smeg’s L30FAB flueless gas fire is as cool as its other matching 50s-style household appliances. Made from enamelled metal, the L30FAB can be hung on the wall of any room (except the bathroom) and requires no recess, hearth or chimney flue. The piezo spark makes it easy to start, and there are 3 settings (ignite, low and high), all discreetly housed on the side. How a flueless gas fire works: Flueless gas fires give you instant warmth, anywhere in the home. If you have a natural gas supply, can run a standard 8mm gas pipe to the fire installation point, plus adequate ventilation and a minimum room size (23-30 cubic metres), you can have a flueless fire installed. Using the latest gas technology, flueless fires do not require a chimney or flue to operate. Instead, combustion gases are passed through a catalytic converter system, where the carbon monoxide from the air is converted into harmless carbon dioxide. The converter works so effectively that the air coming out is cleaner that it was coming in. And because they use 100% of the gas for heat, flueless fires are far more efficient, and emit less carbon. Note: installation of these fires must be made by a GasSafe-registered engineer. 10cm clearance is needed on either side of the fire; 80cm, fire to ceiling; and 6cm, to a solid floor.
|
|
£699.00
|
|
|
Flueless fire, glass and stainless steel, No chimney or flue required, 100% efficient, reducing fuel costs, Cleans circulating air, Oxygen Depletion Sensor, Flame Failure Device, Catalytic converter, Instant warmth
|
|
£880.84
|
|
